ITC+ air-cooled chiller 100L (2024)

AN INTELLIGENT COMBINATION

The ITC+ (eutectic plate & ITC thermostat) air-cooled chiller is particularly well-suited to boats without a constant source of power, and where access to water is impractical.

It allows food to be kept cool without the need for a continuous power supply, thanks to the eutectic liquid that can store the cold, saving battery power.

The intelligent system detects when surplus energy is available to"recharge" the eutectic plate with cold. Conversely, when excess power is no longer available, the system reduces its consumption.

Thanks to the intelligent ITC thermostat and temperature sensor, energy consumption can be optimized by controlling compressor operation and adjusting the cooling power actually required.

AN INFINITE REFRIGERATION CYCLE

The ITC+ 3201 chiller is specifically designed to be powered by ambient air. Here's how the system works

1. A fan draws in ambient air through grilles on the compressor
2. The air passes through a heat exchanger which compresses the gaseous refrigerant, increasing its temperature and pressure.
3. The refrigerant circulates through a condenser, releasing its heat into the ambient air. This condenses the refrigerant into a high-pressure liquid
4. The refrigerant passes through an expansion valve where its pressure drops, cooling its temperature. It then becomes a very cold, low-pressure mixture of liquid and gas
5. This mixture circulates inside the eutectic plates. The evaporator absorbs the heat from the eutectic mixture, freezing it and allowing the refrigerant to evaporate.
   This heat transfer process reduces the temperature inside the compartment, while the eutectic solution stores the cold.
6. The refrigerant, in its gaseous state, returns to the compressor to repeat the cycle indefinitely.

MAIN POINTS :

• Air cooling
• BD35 F compressor
• Quick and easy installation
• Model U100X035A17161AA
• Evaporator with cold accumulator
• Intelligent thermostat temperature control

BOX CONTENTS :

• 1 - Danfoss BD35 F compressor
• 1 - ASU eutectic plate
• 1 - Flexible connection 3m
• 1 - ITC thermostat
• 1 - Fixing bracket
• 1 - Screw kit
• 1 - PDF documentation