8 Reasons Why Your Internet is Slow (and How to Fix It) (2024)

More ways to speed up a slow internet connection

We provide some quick tips below to help speed up your internet connection. But if you’re ready to get to the bottom of your internet speed issues with some thorough troubleshooting, see our internet troubleshooting guide.

First, know your plan speed

You need to know how much speed you pay for each month and compare that number against the speed you’re actually getting now. Look on your paper bill or log in to your online account to see your plan’s advertised maximum speed.

Next, run a speed test and compare

Running a series of speed tests while connected to different points in your network can help you figure out where your speeds are slowing down. We’ll break the testing process down into two sections.

Part 1: Test the modem

Your first speed test is to see if you’re getting the correct speeds to your home compared with what you’re supposed to get from your internet provider. To get the most accurate results for your initial speed test, unplug your router from the modem and connect a computer to the same port on the modem using an Ethernet cable. If you have a wireless gateway, just plug it into one of the Ethernet ports.

Warning: We don’t recommend browsing the internet for extended periods of time without using a router. Your router has some excellent built-in security features that protect your network from viruses and malware.

This first test should give you results that are close to the speeds promoted with your plan. If not, try to track this issue over multiple days and times of day to establish a pattern. Contact your internet provider to talk about why you’re not getting the correct speeds if you continue to see lower than expected results.

Part 2: Test the router

If your modem isn’t the issue, the next step is to test the router. Plug the router back into the modem and run multiple speed tests using your wireless devices, and wired devices plugged into the router’s Ethernet ports.

If you see a vast difference between the modem and router tests, then your router is causing your connection slowdowns—or the Ethernet cable tethering your router to the modem.

Keep in mind that not all wireless devices experience identical speeds. Their connections depend on the hardware inside no matter what router you use, so a budget Samsung phone will have slower Wi-Fi speeds than an expensive wireless card plugged into your desktop.

To troubleshoot router problems, follow these steps:

Step 1: Unplug the router’s power, wait 30 seconds, and then plug it back in.

Step 2: Make sure all cables are connected securely and that all ports work.

Step 3: Update your router’s firmware. You can do this by logging in to your router’s web interface or mobile app. (Your ISP likely does this automatically, but it’s worth checking.)

Step 4: Reposition your router.

Step 5: Move wireless connections to the best Wi-Fi band.

Step 6: Change Wi-Fi channels in your router’s interface to find one that’s less crowded.

Step 7: Try a factory reset by pressing the reset button located on the back of your router.

If none of these steps work, you may need to upgrade to a newer or more powerful router. Internet tech advances rather quickly, and if your router is more than a few years old, it might be time to get yourself something more modern.If you’re looking for router-buying guidance, we have recommendations for the best long-range routers, the best modem and router combos, and the best routers for Xfinity.

Check for Wi-Fi dead zones

Wi-Fi problems can stem from multiple factors. It could be your router’s range, a crowded frequency channel or band, or signal interference caused by physical obstructions and other electronics.

You already know that you should place your router at a central and elevated location for the best coverage, so we’ll assume that you’ve already done that and pointed your antennas in the right direction.

Go to different areas of your house with a computer or smartphone and watch the Wi-Fi signal strength indicator. If you notice a lot of dead zones, you may need to move your router again (if they happen in areas where you normally need Wi-Fi) or invest in something to boost your Wi-Fi signal to that particular area. You can also make a Wi-Fi heatmap if you want to get more precise with it.

If you have more than a couple of issues with Wi-Fi dead zones, we recommend upgrading to a mesh networking kit. They usually ship with at least two nodes—one that connects to your modem and another that communicates directly with the first unit—to create a ”blanket” of coverage. There’s no centralized point, and you can easily add more nodes to extend coverage. Moreover, devices seamlessly switch between nodes as you move about the home or office.

If you prefer to stick with the traditional router, you could add a Wi-Fi extender or powerline adapter, However, we still prefer mesh router kits versus the router/extender setup.

Reorganize your Wi-Fi connections

If you’ve already pruned your Wi-Fi connections of unnecessary devices, it’s time to make sure all active connections are on the correct Wi-Fi band.

Most modern routers offer two Wi-Fi bands, which each create their own visible Wi-Fi network. By default, these are usually labeled with their frequency bands, but it might be different if you’ve changed your Wi-Fi network’s name.

These bands operate on two different frequencies: 2.4 GHz and 5 GHz. The 2.4 GHz frequency band has a better range, but it’s slower and more susceptible to signal interference from other electronics. The 5 GHz band is faster but can’t travel as far.

Basically, you want to use the 5 GHz band for most bandwidth-heavy applications like streaming or gaming. Devices that don’t need that much speed—like smart home devices—should use the 2.4 GHz band instead.

Typically, you can change the Wi-Fi band each device uses by logging in to the correct Wi-Fi network on each device. However, some routers broadcast only one network name and automatically selects the best frequency band for your device. This can be problematic if you really need the faster 5 GHz connection, but the router forces your device to use the 2.4 GHz band.

Change your Wi-Fi band’s channel

Changing your router’s channel is a standard troubleshooting suggestion, but it may not work, and here’s why.

All three frequency bands are divided into small 20 MHz channels, and routers combine these channels to make larger ones. Most modern Wi-Fi 5 and Wi-Fi 6 devices use 80 MHz channels when they connect to the 5 GHz band for the most speed, so routers use these by default.

The thing is, routers only list the smaller channels, so you may run a Wi-Fi diagnostics app and see that channel 36 is clear for you to use, but in reality, it’s probably being used by a neighboring network that, like yours, combines channels 36, 40, 44, and 48 to create one 80 MHz channel.

If that’s the case, your best bet is to select one of the higher 5 GHz channels (if they’re available to you) and hope for the best. Most standalone routers allow you to change the channel in the web interface or mobile app, but you usually can’t change the channel on a mesh system.

Check connected devices

As we mentioned before, sometimes the issue isn’t with your internet connection—it’s with the smartphone, computer, or tablet you’re using to access the internet. It may need a reboot, it may be outdated, or you have too many apps and programs open, bogging down the device’s processor.

Manage your network

If you’ve made it this far and you’re still experiencing problems with slow internet speeds, run through the tips in the home network traffic section of this post if you haven’t already.

Your speed issues most likely stem from your internet provider’s reliability or the traffic on your own home network. Even if you’ve organized and trimmed down your number of connected devices, you could still not have enough bandwidth at certain times of day to cover everything your network has to handle. The only solution to this is to either use the internet less or get a faster internet plan.

8 Reasons Why Your Internet is Slow (and How to Fix It) (2024)

FAQs

8 Reasons Why Your Internet is Slow (and How to Fix It)? ›

Turn off internet-connected devices when you aren't using them. Clear your browser cache and cookies. Exit streaming apps after watching videos or listening to music. Restart devices regularly.

How to fix slow Wi-Fi at home? ›

Why is my Wi-Fi so slow and how can I fix it?
  1. Check your router location and do a restart.
  2. Test whether your bandwidth is low.
  3. Scan for viruses and other malware.
  4. Too many devices connected.
  5. Check your device.
  6. Reinstall your network drivers.
  7. Change your DNS server.
Aug 30, 2023

How to speed up your internet for free? ›

How to increase your internet speed for free
  1. Clear your cache and cookies. ...
  2. Restart your modem and router. ...
  3. Move your router. ...
  4. Use a wired connection. ...
  5. Move your router antennas. ...
  6. Update your router's firmware. ...
  7. Disconnect any unnecessary devices. ...
  8. Close any unnecessary apps or windows.

What is the solution to poor internet connection? ›

Turn off internet-connected devices when you aren't using them. Clear your browser cache and cookies. Exit streaming apps after watching videos or listening to music. Restart devices regularly.

How do I fix my internet? ›

Top 5 quick fixes for internet issues
  1. Restart your modem and router or internet gateway (modem/router combo) An equipment restart is the golden rule of internet troubleshooting. ...
  2. Check your wires and cables. ...
  3. Move your router to a better spot. ...
  4. Test a different website or online activity. ...
  5. Check for an outage.
Jan 4, 2024

How do I make my Wi-Fi speed faster? ›

You can increase WiFi speeds by:
  1. Moving your router.
  2. Power cycling your equipment.
  3. Securing your WiFi.
  4. Upgrading to a faster internet connection.
  5. Using the latest WiFi technologies.
  6. Replacing your equipment.
  7. Updating your firmware.
  8. Getting a WiFi extender.
Dec 8, 2023

How to fix internet slow? ›

How to fix a slow internet connection
  1. You need to restart your modem and router. ...
  2. Your home network is congested. ...
  3. You need a stronger Wi-Fi signal. ...
  4. Your networking cables are loose or damaged. ...
  5. You have high latency. ...
  6. Your devices need an update or are outdated. ...
  7. Your provider's network is congested. ...
  8. ISP throttling.
Jun 5, 2024

How do I get 100% internet speed? ›

Connect your PC or Mac to your router using an Ethernet cable. An actual cable will deliver the fastest possible speeds for your connection, potentially reaching speeds of many Gbps. Ethernet cables provide a faster and more stable internet connection than Wi-Fi.

How can I boost my slow internet? ›

Tip: If your router has a built-in timer, you can set times to automatically turn your Wi-Fi off and reboot.
  1. Keep Your Network Secure.
  2. Clear Your Browser History & Cache.
  3. Change the Frequency on Your Router.
  4. Reduce the Distance Between the Router and the Device.
  5. Increase the Reach of Your Wi-Fi Signal.

How can I get super speed internet? ›

Update Your Firmware Regularly: To ensure optimal performance, it's crucial to update your router's firmware regularly. Firmware updates often include bug fixes, security patches, and performance enhancements that can improve your internet speed and overall connectivity.

Why is my internet suddenly slow? ›

A slow internet connection may be due to a variety of reasons. It could be your inefficient router, internet service provider (ISP) bandwidth throttling, outdated devices, or even malware. While speeding up your internet connection on your computer is not always easy, there are ways to optimize it.

How can I make my internet connection stronger? ›

10 tips to help improve your wireless network
  1. Choose a central location. ...
  2. Move your router off the floor. ...
  3. Replace your router's antenna. ...
  4. Reduce wireless interference. ...
  5. Replace your device wireless card-based network adapter. ...
  6. Add a wireless repeater. ...
  7. Change your wireless channel. ...
  8. Update your firmware or network adapter driver.

What weakens internet connection? ›

Proximity to the wireless access point or router, as well as physical obstructions, can affect the quality of your Internet connection. To improve your connection speed, move closer to the access point and make sure that there are no physical obstructions between the access point and your computer.

How do I fix no internet problem? ›

Can't Connect to Internet? Here's 15 Ways to Troubleshoot
  1. Check for Physical Connectivity Issues. ...
  2. Restart the Router and Modem. ...
  3. Evaluate Software Problems. ...
  4. Check If You're Outside the Wireless Signal Range. ...
  5. Check Service Isn't Being Blocked. ...
  6. Open Windows Network Diagnostics and Check Your DNS settings. ...
  7. Check the Wi-Fi Adapter.
May 23, 2024

How do I know if my modem or router is bad? ›

Reduced Speeds and Reduced Connection Quality

If you feel that your internet speeds have decreased or you are seeing issues with increased buffering and lagging or breaking in the connection, it could be time for a new modem. You can easily test your internet speed with online tools like Speedtest.net.

How do I fix my internet data connection? ›

General troubleshooting tips for Android devices
  1. Open your Settings app and tap Network & internet or Connections. Depending on your device, these options may be different.
  2. Turn Wi-Fi off and mobile data on, and check if there's a difference.
  3. If not, turn mobile data off and Wi-Fi on and check again.

Why is my Wi-Fi speed so slow when I have fast internet? ›

Number of connected devices: As a rule of thumb, the more laptops, game consoles, TVs and other gadgets that are linked to your network, the slower your internet speed. Quality of cables and your router: Old or poor-quality cables and routers can negatively impact your internet speed.

How can I fix a weak Wi-Fi signal in my house? ›

While there is no golden rule for fixing wireless network issues, the following tips and tricks may help improve the performance of your network.
  1. Choose a central location. ...
  2. Move your router off the floor. ...
  3. Replace your router's antenna. ...
  4. Reduce wireless interference. ...
  5. Replace your device wireless card-based network adapter.

Why is my Wi-Fi connection extremely slow? ›

A slow internet connection may be due to a variety of reasons. It could be your inefficient router, internet service provider (ISP) bandwidth throttling, outdated devices, or even malware. While speeding up your internet connection on your computer is not always easy, there are ways to optimize it.

How do you refresh your router? ›

Here's what you'll do on most routers:
  1. Keep your router plugged into the power source.
  2. Insert a paper clip into the Reset opening on your router. Some routers will also have a button you can press with your finger.
  3. Hold this button down for about 30 seconds.
  4. Wait for the router's lights to come back on.
Jun 14, 2024

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Pres. Carey Rath

Last Updated:

Views: 6617

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Pres. Carey Rath

Birthday: 1997-03-06

Address: 14955 Ledner Trail, East Rodrickfort, NE 85127-8369

Phone: +18682428114917

Job: National Technology Representative

Hobby: Sand art, Drama, Web surfing, Cycling, Brazilian jiu-jitsu, Leather crafting, Creative writing

Introduction: My name is Pres. Carey Rath, I am a faithful, funny, vast, joyous, lively, brave, glamorous person who loves writing and wants to share my knowledge and understanding with you.